Industrial system

RWDF microwave/hot-air low temperature conveyor dryer


 

(1) Introduction
RWFD microwave/hot-air low temperature conveyor dryer is mainly used in dehydration of powder materials under air atmosphere. Depend on the user’s actual demand, it can choose either pure microwave drying or microwave/hot-air drying. In comparison to the traditional dryer, our dryer’s structure is simpler, larger in capacity, smaller foot-print, higher efficiency, and save energy over 40%.

(2) Structure
RWFD microwave/hot-air low temperature conveyor dryer consists of frame, microwave cavity, drives, belting, microwave feeding system, moisture extraction system, circulating cooling water system, belting rectification and tension device, electrical control system, hot air piping or heat exchanger, etc.

(3) Main technical specifications:
1) Length of dryer: customize
2) Working mode: Continuous
3) Power supply:AC 3~ N 380V ± 10V / 50Hz
4) Rated capacity: customize
5) Microwave frequency: 2.45GHz
6) Output microwave power: customize
7) Measurement of humidity and temperature: Thermohygrometer, infrared pyrometer
8) Maximum working temperature: 180oC
9) Temperature/humidity control: Automatic or manual
10) Air flowrate: customize
11) Air flow pressure: customize
12) Cavity dimension: Length×Width×Height = customize×1200mm×800mm
13) Microwave leakage level: Comply standard of GB10436-89
14) Cooling water: Outside-connected circulating cooling water
15) Cooling water pressure: 0.15-0.2Mpa
16) Cooling water flowrate: customize
17) Water temperature and quality requirement: hardness ≤ 60mg/L (CaCO3) and comply standard of GB10067.1-88
18) Clean compressed air: Pressure: 0.4-0.7Mpa; Consumption: 0.1m3/h
19) Overall dimension: customize
20) Conveying speed range: Adjustable
21) hot air piping: customize

(4) Application fields:
Drying of all kinds of inorganic, organic nonmetallic materials, and agricultural products, etc.